1 thought on “Articles of Association of the Standardization Technical Committee of the National Boiler Pressure Vegetables”
Jordan
Article 1 In accordance with the provisions of the “National Professional Standardization Technical Committee”, this constitution is formulated in accordance with the requirements of the Standardization Management Committee of the National Standardization Management Committee. It: In order to meet the needs of our country to improve the socialist market economy system and join the World Trade Organization, the standardization of pressure equipment such as boilers, pressure vessels and pressure pipelines is better carried out. According to the decision of the National Standardized Management Committee, The National Committee of Standardization of Boiler Pressure Vegetables (hereinafter referred to as the “Pot Land” of the National Boiler Pressure Vegetables). 3 The “Pot Land” is a national standardized technical work organization engaged in stress equipment such as boilers, pressure vessels and pressure pipelines nationwide. State standards and industry standards (including guiding technical documents) such as design, manufacturing, inspection and acceptance of pressure equipment (including normal pressure equipment) such as pressure pipelines (including normal pressure equipment) are formulated, revised, reviewed, promoted, explained, data editors and consulting services Wait for work. It 4 “Pot Ratings” led by the National Standardization Management Committee, and the seal of the “Pot Ratinom Standard Committee” and its secretariat was issued by the National Standardization Management Committee. The “Poto Bid Committee” is codenamed SAC/TC 262, and the full English is called “China Committee on Boilers and Pressure Vessels”. The English abbreviation is “CSCBPV”. Themids of the “Booth Bid Committee” are: The chapter work task 1: Under the guidance of the national standardization guidelines and policies, the relevant government authorities such as the National Standardization Management Committee Suggestions on the standardization of the standardization of this major, responsible for the specific implementation of the standardization of this professional. It 6 In accordance with the principles of the state on standard formulation and amendments, and the principle of using international standards and foreign advanced standards, according to the actual needs of domestic professional standardization, responsible for organizing and formulating this professional standard system form, responsible for proposing this this Professional formulation and revision of national standards and industry standards, annual plans, and adoption of adopting international standards and foreign advanced standards. Itly, in accordance with the plan approved by the relevant government authorities such as the National Standardization Management Committee, it is responsible for organizing the formulation, revision and review of national standards and industry standards. According to the needs, the “Pot Rong Bid Committee” may be responsible for organizing and publishing and publishing reference technical documents such as standard cases of this major. The review work responsible for organizing the national standards and industry standards for the submission of reviews, etc., put forward the conclusions of review of the standard of the standard, the use of international standards and the situation of foreign advanced standards, and the technology of standards for standards Contents and review conclusions are responsible. It 9 In accordance with the relevant provisions of the National Standardization Management Committee, complete the report and consultation of this professional mandatory national standard and industry standards. The work, training, and interpretation of national standards and industry standards is responsible for organizing the national standards and industry standards. Suggestions on the competent administrative departments put forward written reports and standardized results award projects. The entrusted by the National Standardization Management Committee and undertakes the standardized technical work of the standardized organization of stress equipment such as boilers, pressure vessels, and pressure pipelines such as boilers, pressure vessels, and pressure pipelines in various countries, including international standards for international standards The document statement, review the Chinese translations of my country’s proposals and international standards, put forward opinions on the foreign regulations of the notification, participate in the meetings of the technical committee of the corresponding international organizations, and carry out international standardized technical exchanges. The development dynamics of the development of international standards or foreign advanced standards, translate international standards and advanced foreign standards, and provide consulting and services for the government and enterprises. It, entrusted by the National Standardization Management Committee to undertake the drafting of foreign language translation and international standards that undertake national standards and industry standards in this specialty, and it is obliged to recommend that my country’s standards have become international standards. It, entrusted by the relevant administrative departments of the State Council, the level of evaluation of relevant standards within the scope of standardization of this major in the work inspection, market supervision and qualified assessment work. Entrusted by the relevant administrative department of the State Council, it may undertake the standardized review of the project introduced by this major, and submits a standardized level analysis report to the competent department of the project. It 15 to complete other tasks related to the standardization of this specialty entrusted or assigned to the relevant government department. The “Pot Ratinopus” can carry out the standardization of this major for the whole society, accept commission of provinces, municipalities and enterprises, and undertake the review and consultation of local standards and corporate standards within the scope of this major. For technical services, undertake relevant computer software development, technical reviews of new materials, new technologies and new processes within this professional scope, and also undertake standards such as standard compliance review and security registration within the scope of this major. Chapter 3 Organization The “Pot Lands Committee” by the design, manufacturing, supervision, inspection, distribution, use, teaching, and teaching and teaching and teaching, and teaching, and teaching and teaching, Members of scientific research and other aspects of work and units, representing the proportion of government, manufacturers, users, and other aspects, the proportion of members should be basically balanced. The permanent office of the “Pot Rong Bid Committee” is the secretariat. The “Poto Bid Committee” has several members and unit members, including one chairman and several deputy chairmen; one secretary general and several deputy secretary -general; Several people. The members of the member shall be served by a high -themed level and rich practical experience, familiarity and enthusiastic standardization work, can actively participate in standardized activities, and have high or senior technical titles. Members should acknowledge and are willing to abide by this charter, and the units where the members are located shall bear the cost of participating in the standardization work. Mou members can be self -recommended by persons or units enthusiastic about standardization work. After qualifying for the “Pot Ratioment Committee”, they are submitted to the National Standardization Management Committee for review and approval and appointment. The term of office of the committee can be re -elected for five years. The members who enjoy voting rights in the “Pot Ratinom Standard Committee”, have the right to propose and criticize the work of the “Poto Bid Committee”, and have the right to obtain the relevant standard materials, documents and information of the “Poto Bid Committee” Essence Plip members should actively participate in the work of the “Pot Ratial Bid Committee”, do not perform their duties, and do not participate in the “Pot Ratial Bid Committee” standard review, or often cannot participate in the “Pot Lands Committee” activities and work changes due to work changes. If you are not suitable to continue serving as a member, the “Pot Ratings” make suggestions for adjustment or dismissal, and report to the National Standardized Management Committee for approval. The members who need to supplement should be recommended at least three members. After qualifying the “Pot Ratioment Committee”, the National Standardization Management Committee will be reported to the National Standardized Management Committee for review and approval and appointment. It 20 “Pot Ratinom Standard Committee” can set up several units. The unit members enjoy voting rights in the “Poto Bid Committee”. I have the right to obtain the relevant standard information, documents and information of the “Pot Ratinom Standard Committee”. Mou members should recognize and are willing to abide by this charter. The unit members should focus on manufacturers of pressure equipment such as boilers, pressure vessels, and pressure pipelines. Application. Members of the unit shall be recommended by members or other members of the unit, and shall be submitted to the National Standardized Management Committee for review and appointment after being qualified for the “Pot Land”. The representatives of the unit members should be familiar with and enthusiastic standardized work, and can actively participate in standardized activities. They are held by those with senior or senior technical titles. The term of office of the unit can be re -elected for five years. I: 21 Director and deputy chairman of the director shall be recommended by the relevant competent authorities to report to the National Standardization Management Committee for review and approval and appointment. This members and deputy chairmen are responsible for the overall work of the “Pot Ratial Bid Committee”, guiding the “Poto Bid Committee” Secretariat to perform their duties, and on the basis of fully summarizing the opinions of all parties, in the principle of consistent negotiation, organizing and organizing the organization, organizing the organization, organizing the organization, organizing the organization, organizing the organization and organizing the organization. Form all important resolutions at the meeting, and reach an agreement on standard formulation, revision and other major matters. The secretary -general shall be recommended by the secretary -general’s undertaking unit. Deputy Secretary -General shall be nominated by the Secretary -General. The deputy secretary -general should generally be held by the staff, with a term of five years and can be re -elected. The secretary -general is responsible for presiding over the daily work of the “Poto Bid Committee” to ensure the normal operation of the “Booth Bid Committee”. It 23 Consultation should be a senior expert in the enthusiastic and standardized work within the scope of this major. It should be authoritative and representative. It can be self -recommended or recommended by the members. The consultant has no voting rights, but it should be attended by all members to obtain the relevant standard materials, documents and information of the “Pot Ratial Bid Committee”. The consultant is obliged to accept the consultation of the “Poto Bid Committee” and the Secretariat, and puts forward opinions and suggestions on the committee of important affairs, standard procedures and major technical issues of the committee, and may also bear some specific work if necessary. Those who no longer fulfill their consultants due to health or other reasons shall be submitted by the secretariat and shall report to the chairman to dismiss. It 24 “Pot Rong Tiber Committee” can have communication members. Communication members are voluntarily applied for enterprises and institutions related to this major. The representatives of communication members may be invited to attend the “Pot Land” meeting, which can express opinions or make suggestions, but there is no voting right. Communication members have the right to obtain relevant standard materials, documents and information of the “Pot Ratinom Standard Committee”. The members of the members, unit members, and communication member units shall pay the “pot capacity committee” and pay the fees to the payment method separately. It 26 The Secretariat of the “Pot Rong Bid Committee” is located at the Sinopec Group Corporation Economic and Technological Research Institute. For working conditions and funding support, the work of the secretariat should be included in the work plan of the hospital. In the leadership of the Secretariat, under the leadership of the chairman and secretary -general, the Secretariat is responsible for handling the daily work of the “Booth Bid Committee”, responsible for implementing the resolutions of the “Poto Bid Committee”, and handling daily work The distribution of the opinions and review drafts and the treatment of feedback, the preparation of the conference, the drafting of the relevant reports, the standard reporting, the contact and coordination of the relevant institutions, and the international standardized activities. It 26 According to the needs of the work, the “Pot Ratinom Standard Committee” may establish a sub -technical committee (hereinafter referred to as the “Branch Committee”). The setting of the “Sub -Committee” and its establishment plan shall be proposed and submitted to the National Standardization Management Committee for approval. “Sub -Committee” is a first -level working agency under the “Pot Ratinom Standard Committee”. It should abide by the charter and accept the leadership of the “Bo Ratings”. Standardized work in the field regularly reports to the “Poto Bid Committee”. The “Sub -Committee” shall put forward suggestions on the standardization work direction and standard planning of the scope of this major on the basis of full investigation and research. After the “Pot Ratioment Committee”, it will be included in the unified plan of the “Pot Ratial Bid Committee”. Organized by the “Sub -Committee”. The chairman of the “Sub -Committee” shall be members of the “Poto Bid Committee”. “Supervise the work. “Sub -Committee” has a secretariat. The work should be included in the work plan of the unit. The employment of the “Sub -Committee” and the seal of the Secretariat, the members of the “Sub -Committee” and the secretary -generals were issued by the National Standardization Management Committee. It 28 According to the needs of the work, the meeting of the chairman of the “Pot Ratioment Committee” decides that it can set up a very set of professional and technical committees in specific fields. The Professional and Technical Committee is responsible for tracking the technical development within the scope of the authorized professional scope to study and solve major technical problems. The Professional and Technical Committee has a chief expert, and its members are appointed by the “Poto Bid Committee”. Its work is conducted under the direct leadership of the “Poto Bid Committee”. According to the needs of the work, the “Pot Rong Bid Committee” can set up a standard working group. The standard working group is mainly responsible for the formulation, revision, standard interpretation of the corresponding standards, and the relevant technical consulting work. The working group shall be approved by the “Pot Ratinom Standard Committee”. The chapter 4 Work Procedure 29 The “Pot Lands Committee” shall propose the formulation and revision of this professional standard for formulation and revision in accordance with relevant government authorities such as the National Standardization Management Committee and other governments. The project’s suggestions are reported to the relevant government departments such as the National Standardization Management Committee, and after coordination and approval, they are included in the standard formulation and revision plan. Itly based on the standard formulation and amendment plan issued by relevant government departments such as the National Standardization Management Committee and other governments, the “Pot Ratioment Committee” is responsible for the implementation of the organizational plan, and instructs and urges the Branch, the Professional and Technical Committee, and the Professional and Technical Committee, and Standard work group or standards are mainly responsible for drafting units to formulate and revise standards. It 31 Standard working group or mainly responsible for drafting the unit on the basis of investigating, analysis and calculation, and test verification. Relevant members and representative units and individuals solicit opinions, and the time for comments is generally two months. The standard working group or the main responsible for drafting units will modify the draft standards after comprehensive analysis feedback, and propose standards for review of the standards and report to the secretariat. 32 The Secretariat reviews the standard for review (including attachments), and submits all members for technical review (review or letter review). The secretariat shall submit the standards to the members one month before the review meeting or two months before the reference requirements. During the review, the review opinions should be negotiated in principle. When the standard must be voted by the members of the “Booth Council” or all members of the “Branch Committee”, the standard shall receive more than two -thirds of the votes of all members and half of the number of members of all units. It can be submitted to the National Standardized Management Committee or relevant government authorities (those who have not attended the meeting at the meeting, and those who did not explain the opinions, and those who did not vote at the time according to the prescribed time were counted). The standards or clauses with different opinions must be processed according to their argument materials. The voting of the review standard should be recorded in the case as an attachment as a standard review opinion. 33 The standard for review passed by the review shall be modified by the standard working group or the main responsible drafting unit according to the review opinions, submit a standard for approval and attachment in accordance with the requirements, and submit the secretary of the “Pot Ratial Bid Committee” secretary At the point. The standard work group or the technical content and quality of writing of the standard reporting of the standard report should be responsible. It 34 Standard submissions The manuscripts are reviewed by the Secretariat for a standard format. After signing the positive and deputy secretary -generals, they will be sent to the positive and deputy chairman for review and signing. The standard submission of the approved manuscript after the review and signing can be submitted to the National Standardized Management Committee or the relevant government authorities for approval. It 35 commissioned by the “Booth Council”, the “Sub -Committee” may undertake the review of the standards within the scope of this professional, and refer to the procedure organization stipulated in Article 32 Examine. The “Sub -Committee” review of the standard submitting manuscripts shall be sent to the Secretariat of the “Pot Ratial Bid Committee” and shall be handled in accordance with the submitting approval procedures specified in Article 34. The “Poto Bid Committee” shall submit the standard for approval of the “Sub -Committee” review, and has the right to file a reconsideration or make amendments. The standards reported by the “Pot Ratinopus” approved by the “Pot Ratings” shall be attributed to the “Poto Bid Committee” or entrusted the corresponding “Branch Committee” interpretation. It 36 The “Pot Ratinom Standard Committee” and its branch committees generally hold a meeting of all members (combined with the review standards and discussion plans) once a year. The budgeting of the funding is to submit a written work report to the relevant government authorities such as the Standardization Management Committee in a timely manner. According to the needs of the work, the “Bo Rong Bid Committee” may hold the co -chairman, deputy chairman, deputy chairman, secretary -general and deputy secretary general of the “Sub -Committee” person in charge of the “Sub -Committee”. The major matters of the bidding committee made a decision, and the meeting was reported to all members. The chapter 5 37 The activity funds of the “Booth Bid Committee” are raised and expenditure in accordance with the principles of special funds. The sources of funds for the “Pot Ratinom Standard Committee” as follows: (1) Standard subsidies provided by relevant government departments such as the National Standardization Management Committee; (2) Secretary The work funding provided by the unit; (3) membership fees paid by members, unit members and communication member units; (4) income from technical consulting, technical services, etc. within this professional scope; (5) funding provided by related parties. The funds for the “Pot Ratinom Standard Committee” for the following aspects: (1) Conference and other activities; R n (3) standard formulation and revision subsidies; (4) Standard research costs; (5) The necessary labor costs in standardized work; (6) Standard writing review fee; (7) The daily office cost of the secretariat. The Secretariat of the “Pot Ratinom Standard” secretariat shall be assigned a person to manage the funds of the “Poto Bid Committee”. The final accounts and final accounts of the funds shall be reviewed by the “Pot Ratinom Standard Committee”, and the secretariat shall be implemented. The approval procedures for the “Poto Bid Committee” funds will be implemented in accordance with the rules of the work of the secretariat. The Secretariat shall report to all members of the fund each year, and reports in writing to relevant government authorities such as the National Standardization Management Committee. Chapter 6 Attachment It 41 Article 41 The charter must be effective after passing through all members’ meetings, and report to the National Standardized Management Committee for record. It 42 The charter is interpreted by the Secretariat of the “Pot Ratioment Committee”.
Article 1 In accordance with the provisions of the “National Professional Standardization Technical Committee”, this constitution is formulated in accordance with the requirements of the Standardization Management Committee of the National Standardization Management Committee.
It: In order to meet the needs of our country to improve the socialist market economy system and join the World Trade Organization, the standardization of pressure equipment such as boilers, pressure vessels and pressure pipelines is better carried out. According to the decision of the National Standardized Management Committee, The National Committee of Standardization of Boiler Pressure Vegetables (hereinafter referred to as the “Pot Land” of the National Boiler Pressure Vegetables).
3 The “Pot Land” is a national standardized technical work organization engaged in stress equipment such as boilers, pressure vessels and pressure pipelines nationwide. State standards and industry standards (including guiding technical documents) such as design, manufacturing, inspection and acceptance of pressure equipment (including normal pressure equipment) such as pressure pipelines (including normal pressure equipment) are formulated, revised, reviewed, promoted, explained, data editors and consulting services Wait for work.
It 4 “Pot Ratings” led by the National Standardization Management Committee, and the seal of the “Pot Ratinom Standard Committee” and its secretariat was issued by the National Standardization Management Committee. The “Poto Bid Committee” is codenamed SAC/TC 262, and the full English is called “China Committee on Boilers and Pressure Vessels”. The English abbreviation is “CSCBPV”.
Themids of the “Booth Bid Committee” are:
The chapter work task
1: Under the guidance of the national standardization guidelines and policies, the relevant government authorities such as the National Standardization Management Committee Suggestions on the standardization of the standardization of this major, responsible for the specific implementation of the standardization of this professional.
It 6 In accordance with the principles of the state on standard formulation and amendments, and the principle of using international standards and foreign advanced standards, according to the actual needs of domestic professional standardization, responsible for organizing and formulating this professional standard system form, responsible for proposing this this Professional formulation and revision of national standards and industry standards, annual plans, and adoption of adopting international standards and foreign advanced standards.
Itly, in accordance with the plan approved by the relevant government authorities such as the National Standardization Management Committee, it is responsible for organizing the formulation, revision and review of national standards and industry standards. According to the needs, the “Pot Rong Bid Committee” may be responsible for organizing and publishing and publishing reference technical documents such as standard cases of this major.
The review work responsible for organizing the national standards and industry standards for the submission of reviews, etc., put forward the conclusions of review of the standard of the standard, the use of international standards and the situation of foreign advanced standards, and the technology of standards for standards Contents and review conclusions are responsible.
It 9 In accordance with the relevant provisions of the National Standardization Management Committee, complete the report and consultation of this professional mandatory national standard and industry standards.
The work, training, and interpretation of national standards and industry standards is responsible for organizing the national standards and industry standards. Suggestions on the competent administrative departments put forward written reports and standardized results award projects.
The entrusted by the National Standardization Management Committee and undertakes the standardized technical work of the standardized organization of stress equipment such as boilers, pressure vessels, and pressure pipelines such as boilers, pressure vessels, and pressure pipelines in various countries, including international standards for international standards The document statement, review the Chinese translations of my country’s proposals and international standards, put forward opinions on the foreign regulations of the notification, participate in the meetings of the technical committee of the corresponding international organizations, and carry out international standardized technical exchanges.
The development dynamics of the development of international standards or foreign advanced standards, translate international standards and advanced foreign standards, and provide consulting and services for the government and enterprises.
It, entrusted by the National Standardization Management Committee to undertake the drafting of foreign language translation and international standards that undertake national standards and industry standards in this specialty, and it is obliged to recommend that my country’s standards have become international standards.
It, entrusted by the relevant administrative departments of the State Council, the level of evaluation of relevant standards within the scope of standardization of this major in the work inspection, market supervision and qualified assessment work. Entrusted by the relevant administrative department of the State Council, it may undertake the standardized review of the project introduced by this major, and submits a standardized level analysis report to the competent department of the project.
It 15 to complete other tasks related to the standardization of this specialty entrusted or assigned to the relevant government department.
The “Pot Ratinopus” can carry out the standardization of this major for the whole society, accept commission of provinces, municipalities and enterprises, and undertake the review and consultation of local standards and corporate standards within the scope of this major. For technical services, undertake relevant computer software development, technical reviews of new materials, new technologies and new processes within this professional scope, and also undertake standards such as standard compliance review and security registration within the scope of this major.
Chapter 3 Organization
The “Pot Lands Committee” by the design, manufacturing, supervision, inspection, distribution, use, teaching, and teaching and teaching and teaching, and teaching, and teaching and teaching, Members of scientific research and other aspects of work and units, representing the proportion of government, manufacturers, users, and other aspects, the proportion of members should be basically balanced. The permanent office of the “Pot Rong Bid Committee” is the secretariat.
The “Poto Bid Committee” has several members and unit members, including one chairman and several deputy chairmen; one secretary general and several deputy secretary -general; Several people.
The members of the member shall be served by a high -themed level and rich practical experience, familiarity and enthusiastic standardization work, can actively participate in standardized activities, and have high or senior technical titles. Members should acknowledge and are willing to abide by this charter, and the units where the members are located shall bear the cost of participating in the standardization work.
Mou members can be self -recommended by persons or units enthusiastic about standardization work. After qualifying for the “Pot Ratioment Committee”, they are submitted to the National Standardization Management Committee for review and approval and appointment. The term of office of the committee can be re -elected for five years.
The members who enjoy voting rights in the “Pot Ratinom Standard Committee”, have the right to propose and criticize the work of the “Poto Bid Committee”, and have the right to obtain the relevant standard materials, documents and information of the “Poto Bid Committee” Essence
Plip members should actively participate in the work of the “Pot Ratial Bid Committee”, do not perform their duties, and do not participate in the “Pot Ratial Bid Committee” standard review, or often cannot participate in the “Pot Lands Committee” activities and work changes due to work changes. If you are not suitable to continue serving as a member, the “Pot Ratings” make suggestions for adjustment or dismissal, and report to the National Standardized Management Committee for approval.
The members who need to supplement should be recommended at least three members. After qualifying the “Pot Ratioment Committee”, the National Standardization Management Committee will be reported to the National Standardized Management Committee for review and approval and appointment.
It 20 “Pot Ratinom Standard Committee” can set up several units. The unit members enjoy voting rights in the “Poto Bid Committee”. I have the right to obtain the relevant standard information, documents and information of the “Pot Ratinom Standard Committee”.
Mou members should recognize and are willing to abide by this charter. The unit members should focus on manufacturers of pressure equipment such as boilers, pressure vessels, and pressure pipelines. Application. Members of the unit shall be recommended by members or other members of the unit, and shall be submitted to the National Standardized Management Committee for review and appointment after being qualified for the “Pot Land”.
The representatives of the unit members should be familiar with and enthusiastic standardized work, and can actively participate in standardized activities. They are held by those with senior or senior technical titles. The term of office of the unit can be re -elected for five years.
I: 21 Director and deputy chairman of the director shall be recommended by the relevant competent authorities to report to the National Standardization Management Committee for review and approval and appointment.
This members and deputy chairmen are responsible for the overall work of the “Pot Ratial Bid Committee”, guiding the “Poto Bid Committee” Secretariat to perform their duties, and on the basis of fully summarizing the opinions of all parties, in the principle of consistent negotiation, organizing and organizing the organization, organizing the organization, organizing the organization, organizing the organization, organizing the organization and organizing the organization. Form all important resolutions at the meeting, and reach an agreement on standard formulation, revision and other major matters.
The secretary -general shall be recommended by the secretary -general’s undertaking unit. Deputy Secretary -General shall be nominated by the Secretary -General. The deputy secretary -general should generally be held by the staff, with a term of five years and can be re -elected.
The secretary -general is responsible for presiding over the daily work of the “Poto Bid Committee” to ensure the normal operation of the “Booth Bid Committee”.
It 23 Consultation should be a senior expert in the enthusiastic and standardized work within the scope of this major. It should be authoritative and representative. It can be self -recommended or recommended by the members. The consultant has no voting rights, but it should be attended by all members to obtain the relevant standard materials, documents and information of the “Pot Ratial Bid Committee”. The consultant is obliged to accept the consultation of the “Poto Bid Committee” and the Secretariat, and puts forward opinions and suggestions on the committee of important affairs, standard procedures and major technical issues of the committee, and may also bear some specific work if necessary. Those who no longer fulfill their consultants due to health or other reasons shall be submitted by the secretariat and shall report to the chairman to dismiss.
It 24 “Pot Rong Tiber Committee” can have communication members. Communication members are voluntarily applied for enterprises and institutions related to this major.
The representatives of communication members may be invited to attend the “Pot Land” meeting, which can express opinions or make suggestions, but there is no voting right. Communication members have the right to obtain relevant standard materials, documents and information of the “Pot Ratinom Standard Committee”.
The members of the members, unit members, and communication member units shall pay the “pot capacity committee” and pay the fees to the payment method separately.
It 26 The Secretariat of the “Pot Rong Bid Committee” is located at the Sinopec Group Corporation Economic and Technological Research Institute. For working conditions and funding support, the work of the secretariat should be included in the work plan of the hospital.
In the leadership of the Secretariat, under the leadership of the chairman and secretary -general, the Secretariat is responsible for handling the daily work of the “Booth Bid Committee”, responsible for implementing the resolutions of the “Poto Bid Committee”, and handling daily work The distribution of the opinions and review drafts and the treatment of feedback, the preparation of the conference, the drafting of the relevant reports, the standard reporting, the contact and coordination of the relevant institutions, and the international standardized activities.
It 26 According to the needs of the work, the “Pot Ratinom Standard Committee” may establish a sub -technical committee (hereinafter referred to as the “Branch Committee”). The setting of the “Sub -Committee” and its establishment plan shall be proposed and submitted to the National Standardization Management Committee for approval.
“Sub -Committee” is a first -level working agency under the “Pot Ratinom Standard Committee”. It should abide by the charter and accept the leadership of the “Bo Ratings”. Standardized work in the field regularly reports to the “Poto Bid Committee”. The “Sub -Committee” shall put forward suggestions on the standardization work direction and standard planning of the scope of this major on the basis of full investigation and research. After the “Pot Ratioment Committee”, it will be included in the unified plan of the “Pot Ratial Bid Committee”. Organized by the “Sub -Committee”.
The chairman of the “Sub -Committee” shall be members of the “Poto Bid Committee”. “Supervise the work.
“Sub -Committee” has a secretariat. The work should be included in the work plan of the unit.
The employment of the “Sub -Committee” and the seal of the Secretariat, the members of the “Sub -Committee” and the secretary -generals were issued by the National Standardization Management Committee.
It 28 According to the needs of the work, the meeting of the chairman of the “Pot Ratioment Committee” decides that it can set up a very set of professional and technical committees in specific fields. The Professional and Technical Committee is responsible for tracking the technical development within the scope of the authorized professional scope to study and solve major technical problems. The Professional and Technical Committee has a chief expert, and its members are appointed by the “Poto Bid Committee”. Its work is conducted under the direct leadership of the “Poto Bid Committee”.
According to the needs of the work, the “Pot Rong Bid Committee” can set up a standard working group. The standard working group is mainly responsible for the formulation, revision, standard interpretation of the corresponding standards, and the relevant technical consulting work. The working group shall be approved by the “Pot Ratinom Standard Committee”.
The chapter 4 Work Procedure
29 The “Pot Lands Committee” shall propose the formulation and revision of this professional standard for formulation and revision in accordance with relevant government authorities such as the National Standardization Management Committee and other governments. The project’s suggestions are reported to the relevant government departments such as the National Standardization Management Committee, and after coordination and approval, they are included in the standard formulation and revision plan.
Itly based on the standard formulation and amendment plan issued by relevant government departments such as the National Standardization Management Committee and other governments, the “Pot Ratioment Committee” is responsible for the implementation of the organizational plan, and instructs and urges the Branch, the Professional and Technical Committee, and the Professional and Technical Committee, and Standard work group or standards are mainly responsible for drafting units to formulate and revise standards.
It 31 Standard working group or mainly responsible for drafting the unit on the basis of investigating, analysis and calculation, and test verification. Relevant members and representative units and individuals solicit opinions, and the time for comments is generally two months. The standard working group or the main responsible for drafting units will modify the draft standards after comprehensive analysis feedback, and propose standards for review of the standards and report to the secretariat.
32 The Secretariat reviews the standard for review (including attachments), and submits all members for technical review (review or letter review).
The secretariat shall submit the standards to the members one month before the review meeting or two months before the reference requirements. During the review, the review opinions should be negotiated in principle. When the standard must be voted by the members of the “Booth Council” or all members of the “Branch Committee”, the standard shall receive more than two -thirds of the votes of all members and half of the number of members of all units. It can be submitted to the National Standardized Management Committee or relevant government authorities (those who have not attended the meeting at the meeting, and those who did not explain the opinions, and those who did not vote at the time according to the prescribed time were counted).
The standards or clauses with different opinions must be processed according to their argument materials.
The voting of the review standard should be recorded in the case as an attachment as a standard review opinion.
33 The standard for review passed by the review shall be modified by the standard working group or the main responsible drafting unit according to the review opinions, submit a standard for approval and attachment in accordance with the requirements, and submit the secretary of the “Pot Ratial Bid Committee” secretary At the point.
The standard work group or the technical content and quality of writing of the standard reporting of the standard report should be responsible.
It 34 Standard submissions The manuscripts are reviewed by the Secretariat for a standard format. After signing the positive and deputy secretary -generals, they will be sent to the positive and deputy chairman for review and signing. The standard submission of the approved manuscript after the review and signing can be submitted to the National Standardized Management Committee or the relevant government authorities for approval.
It 35 commissioned by the “Booth Council”, the “Sub -Committee” may undertake the review of the standards within the scope of this professional, and refer to the procedure organization stipulated in Article 32 Examine. The “Sub -Committee” review of the standard submitting manuscripts shall be sent to the Secretariat of the “Pot Ratial Bid Committee” and shall be handled in accordance with the submitting approval procedures specified in Article 34.
The “Poto Bid Committee” shall submit the standard for approval of the “Sub -Committee” review, and has the right to file a reconsideration or make amendments.
The standards reported by the “Pot Ratinopus” approved by the “Pot Ratings” shall be attributed to the “Poto Bid Committee” or entrusted the corresponding “Branch Committee” interpretation.
It 36 The “Pot Ratinom Standard Committee” and its branch committees generally hold a meeting of all members (combined with the review standards and discussion plans) once a year. The budgeting of the funding is to submit a written work report to the relevant government authorities such as the Standardization Management Committee in a timely manner.
According to the needs of the work, the “Bo Rong Bid Committee” may hold the co -chairman, deputy chairman, deputy chairman, secretary -general and deputy secretary general of the “Sub -Committee” person in charge of the “Sub -Committee”. The major matters of the bidding committee made a decision, and the meeting was reported to all members.
The chapter 5
37 The activity funds of the “Booth Bid Committee” are raised and expenditure in accordance with the principles of special funds.
The sources of funds for the “Pot Ratinom Standard Committee” as follows:
(1) Standard subsidies provided by relevant government departments such as the National Standardization Management Committee;
(2) Secretary The work funding provided by the unit;
(3) membership fees paid by members, unit members and communication member units;
(4) income from technical consulting, technical services, etc. within this professional scope;
(5) funding provided by related parties.
The funds for the “Pot Ratinom Standard Committee” for the following aspects:
(1) Conference and other activities; R n (3) standard formulation and revision subsidies;
(4) Standard research costs;
(5) The necessary labor costs in standardized work;
(6) Standard writing review fee;
(7) The daily office cost of the secretariat.
The Secretariat of the “Pot Ratinom Standard” secretariat shall be assigned a person to manage the funds of the “Poto Bid Committee”. The final accounts and final accounts of the funds shall be reviewed by the “Pot Ratinom Standard Committee”, and the secretariat shall be implemented. The approval procedures for the “Poto Bid Committee” funds will be implemented in accordance with the rules of the work of the secretariat. The Secretariat shall report to all members of the fund each year, and reports in writing to relevant government authorities such as the National Standardization Management Committee.
Chapter 6 Attachment
It 41 Article 41 The charter must be effective after passing through all members’ meetings, and report to the National Standardized Management Committee for record.
It 42 The charter is interpreted by the Secretariat of the “Pot Ratioment Committee”.